1.2mx10m 2mm ESD Antistatic Green Rubber Workbench Table Mat
ESD Anti Static Mat Description :
ESD rubber mat or ground mat should be laid out in the workshops
and advanced laboratories for microelectronic industries such as
electronic semi-conduct devices, electronic computers, electronic
communication equipment and integrated circuits etc. To eliminate
damages caused by static electricity. When anti-static rubber mat
(ground mat) are laid out and grounded, the working surface will
discharge the static electricity of human bodies so that a
near-equipotential can be maintained for ESEDS tweezers, tools,
utensils and instruments, through which human bodies contact the
working table and static sensitive devices(SSD) are free from
broadband interference produced by static discharging such as
triboelectrification etc. In this way, electrostatic protection is
realized.
ESD Anti Static Mat Features :
1. Material : Rubber
2. Color: Green, blue, gray.Blakc,
3. shiny and dull
4. Size:(0.6,0.9,1.0,1.2M)*Length(0-50M)*Thickness(2,3)MM
5. Volume resistance ≤107Ω cm, fast static discharge and the
service life not less than 2 years.
6. Shock resistance and fatigue resistance
ESD Anti Static Mat Application:
Table top use to provide static safe work surface for static
sensitive products in Aviation, Clean-rooms, computer
Operators, Computer Technicians, Fiber Optic, Hospitals, and
Pharmaceutical Industries in high temperature setting. Aerospace
Assembly, Electronic Manufacturing, Electronic Repair, Medical
Assembly and Soldering
ESD Anti Static Mat Spefication:
Construction Material: | Rubber |
Color: | Green, blue, gray, black |
Normal Size: | 0.6,0.9,1.0,1.2M*10m*2mm or Custom |
Two layers: | Static Dissipation layer + Conductive layer |
Surface: | Shiny or dull |
Gross Weight: | around 35kg/roll |
Remarks: | Above sizes are standard, customized size available. |
Performance index of Dissipative Table/Floor Mat |
Dissipative Table Mat/Floor Mat | Specification | Color |
Static Dissipation layer | Surface resistance | 107-109 | 1.2mx*10mx*2mm(T)
1.0mx*10mx*2mm(T) | Green, blue,
gray, black |
Friction static potential V | <100 |
Conductive layer (black bottom) | Surface resistance | ≤106 |
Friction static potential V | <60 |
Static voltage attenuation period | 5000 – 500V | <1.9s |
Flame retardation | GB4609-84, FV-0 (less than 10S) |
Volume resistance | 107-1010Ωcm |
Physical performance index of Dissipative Table/Floor Mat |
No. | Description | Test reference | Results |
1 | Tensile strength | GB 1040 | 3.6Mpa |
2 | Fracture elongation | GB 1040 | 188% |
3 | Tear elongation | GB/T 529 | 20.6KN/m |
4 | Rebound elasticity (the specimen is laminated with 6 layers of
sheets) | GB/T 1681 | 14% |
5 | Impact embrittlement temperature (no cut) | GB 5470 | No damage |
at -25℃ |
6 | Permanent compression change rate, 70℃*22h, compression 25% | GB 10654 | 17.90% |
7 | Hot air ageing | Tensile strength change rate | GB/T 7141 | 8.00% |
Fracture elongation change rate | -3.80% |
Weight loss on heating | 1.08% |
Remarks | Test according to national standards: GB 1040, GB/T 529, GB/T 1671,
GB 5470, GB 10654 and GB/T 7141. |
FAQ:
Q1:How fast can I get the quotation?
A: We usually make an offer within 1 hour after we get your
inquiry. It takes 9 hours if your inquiry hit our email at our free
time.
Q2:How can I get a sample to check your quality?
A: After price confirmation, you can require for samples to check
our quality. If our samples can not be provided free, we will
charge for the sample cost..But the sample cost can be refundable
after order confirmation when your quantity of the order is more
than the MOQ.
Q3:What about the leadtime of sample?
A: It takes 2-3 days after your samples confirmation
Q4:Can you do the design for us?
A: Yes. We have a professional team having rich experience in
designing and manufacturing. Just tell us your ideas and we will
help to carry out your ideas into perfect fact. It does not matter
if you do not have someone to complete files. Send us high
resolution images, your Logo and text and tell us how you would
like to arrange them. We will send you finished files for
confirmation.
Q5:What about the lead time for mass production?
A: Honestly, it depends on the order quantity and the season you
place the order. The lead time of 500pcs is about 8 working days.
Generally speaking, we suggest that you start inquiry two months
before the date you would like to get the products at your country.
Q6:What is your terms of delivery?
A: We accept EXW, FOB, CIF, etc. You can choose the one which is
the most convenient or cost effective for you.
Q7:What payment terms and mothod can you accept?
A: Payment Terms:20% down payment and balance before shipment.
Payment Method:Wire Transfer,Western Union,Paypal, L/C,Cash
